Do you asking about striped walls and how to paint stripes on wall ? learn top tips and steps to paint stripes on a wall and stripes in the interior
Striped walls are interior trends for the past few centuries. That is why the walls in vertical stripes are often associated with classicism and baroque. However, the strip comes to mind at the mention and retro interiors a la pop art. It is also popular in modern designers creating interiors in the spirit of our time. Striped wallpaper or painting the interior walls of the strip are use in any home areas: often in the bedroom, hallway, living room, nursery, rarely in the kitchen and bathroom.
In the creation of any styles of play strips on the walls? As she "redraw" the space and what you need to consider, going striped wallpaper or paint stripes on a wall? Everything in order, and how to paint stripes on wall, read the following lines.
I suggest this album for you : Modern stripes paint ideas on the walls
 |
| How to paint stripes on wall, striped walls, stripe painting |
Currently stripes - is not just a fashion trend in the clothing, but the main trend in the interior. It is used very often simply as a decorative technique that sets a rhythm, making the interior more dynamic and lively. The strip in the interior - is the alternation of contrasting colors to attract attention.
Striped painted walls - an enduring classic. Not able to strip the walls to emphasize the style - classic or vintage, country or pop art. Actual strip and modern interiors. It most often selected when required to adjust the proportions space visually. It is known that vertical strips visually raises the ceiling, but the room seems narrower. Horizontal stripes visually expanding space, but reduce the height.
The diagonal strips also visually increase the room, thus reducing the visual effect of the ceiling does not arise.
To decorate stripes on walls , often resort to one of two ways: either paste over their striped wallpaper or paint stripes. have paint on the walls strip has an important advantage: wallpaper with stripes pick the right color and the required width is not so easy, and achieve desired color of paint would not be difficult. The width of the strips during application can also be arbitrary.
how to paint stripes on a wall ?
Stage One: Planning
First you need to choose the width, color and location of the strips. It should be borne in mind that multi-colored stripes make the room a colorful and bright.
To avoid this, you can make the strips of one color but different shades, such as blue and blue, violet and purple, etc.
You can take one color, but use different inks: matte and glossy.
These monochrome options suitable for both the classical and the modern monochrome interior.
The strips on the wall can be two or three colors, and can even more.
If stripes on wall are interleaved with one stripe color (base), all done at once. Just each strip once painted a different color. If different color bands will not only coexist with the base, but also with each other, it will take additional steps painting (see below).
Measure the length of the walls to be painted and to divide them into the desired width strips. Will it integer number of bands for each of the walls? If not, it is possible to change the planned width of the strips (for example, 10 cm was originally planned, but equal to the number of lanes can be blocked by 10.25 cm) or to make one of the strips in the inconspicuous corner slightly more or less than others.
If desired, the width of the bands can be different: for example, cream stripes - wide, and red - narrower.
Today in fashion in a wide strip of wall. Its width is about 10 to 30 cm
On a sheet of paper, you can make a plan of the future location of the strips on the wall, to avoid confusion later.
Step Two: Paint the walls in the base color
Base - the color of one of the bands. Base should be a lighter color strip. For example, if you paint the walls in a creamy blue stripes, the base should be a cream color.
If you are going to paint stripes on a wall of the same color but with different textures (matte and glossy), as a basic need to use matte paint.
First wall painted in the base color. If the wall has previously been painted a darker paint, you must either remove it using special solvents from the building store or first paint a dark wall with white paint, and then after full drying apply the base color.
After applying the base color of paint you need to wait its complete drying. Usually pack with paint to indicate the amount of time it dries. If it's latex, can be taken for the creation of strips on the wall on the next day after the application of the base layer.
Step Three: measuring and marking
Now we need to arm construction tape, spirit level and pencil or chalk. Begin to measure from a dark corner of the top, drawing a line down ( if vertical stripes ) or from corner to corner ( if horizontal stripes ). Spirit level will help to make the band even.
Step Four: paste the masking tape
Drew a line, proceed to gluing masking tape.
 |
| How to paint wall stripes? Using masking tape |
Scotch glued inside those bands that will remain in the base color!
At the same time it must be exactly applied glue to the wall line so that the line does not remain sealed.
This line is painted over, if it is applied with a pencil. If markup makes chalk, stickers after masking tape line to be erased with a dry cloth.
Every need scotch tape adhered smooth - it may be a conventional plastic card or a special trowel. This is to ensure that the tape tightly closed wall and it was not hit by paint.
Do not forget to stick masking tape on the wall and ceiling joints, as well as wall and floor, thereby limiting the place of painting and protecting the surface from staining those who do not need to be painted.
Step Five: dyeing
If bands are wide, can be painted small roller. If narrow - will have to work with a brush. One layer of paint is usually sufficient if the base and the second color are close. If colors are very different, you may want to schedule two layers. The second layer is applied within a few hours after the first. But qualitatively to paint the walls with stripes, better to do one layer.
If, in addition to the base, not two colors, and more, each strip once painted in a different color.
Paint must be carefully with calling on the masking tape to joints on the strip was not NOT, locations. The paint is applied from the top down.
Painting stripes with removing masking tape:
Tape should be removed almost immediately after application (unless, of course, you do not have scheduled the second layer). If you wait until completely dry and only then remove the tape, paint can sometimes obshelushitsya. Therefore, you need to remove the tape, not later than one hour after application, and you can immediately after the spray operation. The tape can be removed from the bottom up or top down, gently and slowly.
How to paint stripes on wall in three colors:
If the planned bands of several colors, and they are adjacent to each other, you can do so: just stick tape on the base color, then color each strip in the color, and then remove the tape. Stripes of different colors are obtained with a base color separating strips having a width equal to the tape.
The walls are painted with colored stripes with dividing light stripes
You can work on other algorithm to avoid dividing strips:
1. Application of the base layer
2. Layout
3. Sticking adhesive tape inside the base bands - and those that remain basic, and those that will later be painted in a third color
4. Staining bands in the second color, remove the tape
5. After drying again glued tape - now inside the bands that are scheduled to leave in the base color, and inside those strips that were painted in a second color
6. Staining bands in a third color, remove the tape
 |
| Painted stripes without dividing lines |
For the base layer of the lightest tone selected, and as the third color applied last - the darkest of the three colors.
How to paint stripes on a wall and not only: take an assistant masking tape and fantasy
We have considered the classic version of paint on the walls with stripes. But, armed with masking tape, you can nicely Painted walls.
If you want thin strips on the wall, paint the wall first in the base color (the color of the future strips). Then glue tape as your striping will be located, and then simply paint the wall with a roller. Will only remove the tape - and the wall of a monochromatic suddenly turn into a striped.
Scotch in this case can be placed in every one: vertically, horizontally, herringbone (zig-zag), bias, wavy, parallel or perpendicular.
If you stick tape perpendicular wall can be painted squares and diamonds. Technology is the same as described above.
Choose strips for walls interior:
Vertical stripes on the walls will make the room symmetry, as well as visually "stretched" his height, horizontal, on the contrary - will make the room wider, but the ceiling while visually will appear lower.
Wide and at the same time contrasting stripes look not just elegant, but also elegant and neizbity. And more than their width, the more insignificant is the visual "compression" of space.
Result of creativity painting stripes on walls:
Advice. If you first want to paint the walls with stripes, you can practice on a small wall or a piece of plywood, making all the algorithm: the base coat of paint, marking, sticking masking tape, a second application of paint color, remove the tape. Notice how tightly lay tape, not whether podtekla paint under it, how easy is it starred tape, etc. Consider all the nuances and take to paint the walls.
.jpg)
